KDF Cascom SE Casting Machine

KDF Cascom SE Vacuum Pressure Casting Machine with Argon injection.
 
Using Argon for melting and Injection gives a pure cast with no oxidation for super clean porosity free casting.
 
This unit is Made in Japan and has proven very reliable, Tomident have this Casting in our Showroom and use it daily in our onsite Lab.
 
●Excellent castability  This new induction heating unit enables to translating to porosity-    free dence casting, because melting alloy is not by gas flame and    never absorbs any gas. Chamber inverting casting method has    no possibility of involving oxidation film.    In addition, the pressure 0.45MPa by vacuum and pressure is    sufficiently powerful compared to centrifugal casting 0.1MPa.    Also,the maintaining pressure prevents shrinkage cavity and enables    to create any intricate casting results.●Various casting    Available at casting various cases such as Inlay, Crown, Implant    framework and Denture. Usable alloy for dental use is Precious, Non-Precious except Titanium alloy.
 
●Operation panel  The buttons are placed for the flow of casting. 
 
 
https://youtu.be/-h2jXzqTg70
 
 
						Model			Cascom SE							Power requirement			Single phase AC220V-240V ±10%  50/60Hz							Power consumption			Max. 3.5kVA							Overall dimension			560(W)×490(H)×490(D)mm							Output frequency			30–50Hz							Weight			42kg							Environment for set up			Temp.10–40℃, Humidity  30–90%Rh  (not condensing)							Cooling System			Optional chiller or Direct connect water							Melting time			Within 3 min. for 60g of Co-Cr Alloy.							Casting method			Chamber inverting Vacuum and Pressure Casting.  (Automatic)							Pressure			Air or Argon gas  (0.35MPa)							Compressed Air or Argon			Air 0.5 – 1.0MPa, Argon gas 0.5 – 0.8 MPa							Alloy melting quantity			Co-Cr  10-60g, Gold  10-120g but  less than 10cc. 							Castable Alloy						Silver, Gold, Ceramic fused bonding alloy			(Precious, Semi-Precious, Non-Precious)  except Titanium alloy										Number of continuous casting						Standard chiller 5-10 times depends on heating time.			Adding on Additional chiller:Available at continuous casting			Water pipe direct connecting:Available at continuous casting										Type of crucibles			Ceramic crucible, Carbon crucible							Crucible inner size			Around φ25×40mm							Vacuum						L (-40kPa)			M (-70kPa)			H (Continuous)						 							           Pressure timing						1 (0.5 sec.)			2 (0.7 sec.)			3 (0.9 sec.)													Induction power at each stage 
			(Stand by, Retention, Final) : Tuneable (0-99%)

3 week lead after payment 
    $19,800.00Price

    ASHFIELD 

    NSW 2131
    Australia

    +61 2 9799 1414

    ©2017 by Tomident Pty Ltd 富歯科